Do it Yourself - Stain Concrete Floors

Concrete staining has been long and there are many people who have found this inexpensive and long floors as options. Whether to open your porch outside, in the back of the house or the interior color of concrete floor. this floor is the floor of a durable and low maintenance costs. Do it yourself concrete staining is best for your own because the floor is durable.

If you choose to install colored concrete floor of their own, you can save up to 75% of the cost will be charged by the contractor to install this beautiful floor. This is not really difficult to do yourself, and you only need a few things to install them.

Do some tests to ensure concrete slab you able to receive concrete acid stain.

Pour about 8 oz. water in 1 'x 1' and leave the area for several minutes
If water absorbs into the dense and changes the color of the slab with embezzlement, he is a good bet that you do not need to do anything except to continue with the cleaning and staining.

If the drip water on the surface of the sealer on the concrete stain will not allow the chemical to react with the free lime in the concrete that changes color in the real process.

There are two programs of action is a point - the first to try to find out what in concrete and the second will decide whether to try to remove them.

If you decide to remove the concrete sealer is better to use the industrial strength citrus based coatings remover. This type of product will remove the acrylic sealers, and sometimes the solvent-based acrylic sealers. Follow the manufacturer's instructions.

At this point, we will assume that your floor is ready to go. Clean the concrete with a pressure washer that if an application or if the outside is the interior floor you will want to use TSP, replacement or acid detergent such as the Dyna light Blue. Spray your cleaning solution or a bucket and scrub the floor to the floor with stiff bristle brush from the buffer and a black pad.

When the concrete has dried spray the color you want acid stain (1 to 1 dilution with water) using a pump spray in circular motion to ensure full coverage of the entire floor. Wait for two hours or until you can walk with socks on the floor to see if all the areas have been closed. If all looks good then stay to wait another time and then start the cleaning process.

If you want to add another color, just repeat the steps above and you may just want to go forward randomly for marbled effect.

Introducing the water to scrub the floor and stiff brush with the media and store the vaccine again. If you go through the floor white glove test your smoothly. If not rinse and repeat until the floor pass the white glove test. The dark color may require a second rinse. Let a fan during the night.

Wait until the next day to seal, so do not give any trap moisture under the sealer, which will cause white spots.

Seal the floor using 3 / 8 "or 1 / 2" nap roller, and when you wake up with the sealer go in one direction and then back in a corner of the first. This will help eliminate roller marks and ensure a beautiful floor.

Apply 2-3 coats of acrylic floor finish with rayon. A rayon sweeps are usually white and blue string rake head.

This is an important step because this is how you protect the floor. acrylic floor finish that will act as a sheep to protect the victims and the sealer. If you find you have small scratches on the floor, several months after another coat of floor will be finished in to fill scratches and make the floor look new again.

Clean the floor with a neutral cleaner and this clean will ensure that you will receive another coat of floor finished floor.